My Fume Extractor Upgrade – Hakko to Kotto
After years of breathing in the flux fumes that were not being extracted by my Hakko 493 desktop Extractor Fan, and also having space issues when trying to extract fumes …
Solder Reflow using a cheap Preheater
Are you using just a Heat Gun for your SMD Reflow work? Many hobbyists use converted ovens for Reflow, but I’ve always wanted a hot-plate style Reflower. If you have …
Multimeter Test Leads Upgrade / Fluke TL224 Fail!
I thought I’d share my recent multimeter lead experience. It was apparent that I had an issue with my Fluke multimeter leads as I was getting some vague readings. This …
Usage Guide for TL866 Programmer Adapter for 27C400/800/160/322
Although usage of the Digicool Things EPROM Programmer Adapter has been covered in other posts, and the reading of a Mask ROM and programming of an EPROM is also visually …
Frustrated with poor quality Breadboards?
Are you frustrated with poor quality breadboards that you’ve picked up from random eBay sellers? I am! So I was intrigued when Brian Lough (a regular Youtube’r) commented in several of …
EPROM Adapter v1.1 update & back in stock!
Our EPROM Adapter for the TL866 EPROM Programmer has been updated to v1.1 for 2018! If you’d like one of these Adapters, you’ll find a Kitset or a Fully Assembled …
EPROM Programmer Adapter is now up on YouTube
It took me a while, but I finally allocated some time to allow creating a video to demonstrate the usage of our TL866 EPROM Programmer Adapter for 27C400/800/160 and 27C322 16bit …
EPROM Programmer Adapter for 27C400/800/160 and 27C322 16bit EPROMs
If you’d like one of these Adapters, you’ll find a Kitset or a Fully Assembled & Tested option, on Tindie: https://www.tindie.com/stores/DigicoolThings/ Note: We no longer sell on eBay, as their …
User Guide for “Ultimate Mod Board II” Upgraded Master System II
Power LED The power LED upgrade provides a visual indication of the console being powered on. The colour of the LED also indicates which mode the console is currently set …
“Ultimate Mod Board II” (PAL) – PCB Connector Reference
There are six connectors available on the “Ultimate Mod Board II” PCB. These are labeled J1 through J6. The three primary (required) connectors are: Two secondary connectors provide for secondary …