So, recently, I was again working on a digital breadboard project. In this case for my MECB bus based 8-bit retro platform. And, despite having used my 8-bit LED Things regularly, with various projects, for monitoring registers, inputs, and outputs, I had a sudden thought: Wouldn't it be great, if…
Find out more here: 8-bit OLED Thing - This is pretty awesome!
8-bit OLED Thing - This is pretty awesome!
Re: 8-bit OLED Thing - This is pretty awesome!
Thanks to David’s @djrm excellent suggestion (regarding adding latch capability), I’ve now released firmware v1.1.
Given that a Hex display is more suited for displaying data that is more static (like register content etc.), and is not really practical for quickly changing dynamic signals (like a bus), I’ve gone ahead with developing the code further, to accommodate David’s excellent suggestion.
This is implemented using the 2 remaining free I/O pins, to give two choices: Trailing-edge interrupt driven latching, and also Level-driven sample hold.
You can read more about it in the Github Firmware folder, here: 8-bit OLED Thing - Firmware
Given that a Hex display is more suited for displaying data that is more static (like register content etc.), and is not really practical for quickly changing dynamic signals (like a bus), I’ve gone ahead with developing the code further, to accommodate David’s excellent suggestion.
This is implemented using the 2 remaining free I/O pins, to give two choices: Trailing-edge interrupt driven latching, and also Level-driven sample hold.
You can read more about it in the Github Firmware folder, here: 8-bit OLED Thing - Firmware