Re: Simulating the MECB
Posted: Wed Sep 04, 2024 10:01 pm
It turns out that adding a simple single line disassemble to Assist09 after a trace instruction isn't very difficult at all. The formatting could be improved maybe by arranging the output to a single line.
Code: Select all
>R PC-ECAF A-00 B-BF X-FFFF Y-BFB2 U-BF45 S-BF35 CC-D4 DP-BF
PC-EC74
>T 8
PC-EC77 A-81 B-BF X-FFFF Y-BFB2 U-BF45 S-BF35 CC-D8 DP-BF
OP-BE C0 02 LDX $C002
PC-EC7A A-81 B-BF X-000A Y-BFB2 U-BF45 S-BF35 CC-D0 DP-BF
OP-BF B1 00 STX $B100
PC-EC7D A-81 B-BF X-000A Y-BFB2 U-BF45 S-BF35 CC-D0 DP-BF
OP-B6 C0 01 LDA $C001
PC-EC80 A-81 B-BF X-000A Y-BFB2 U-BF45 S-BF35 CC-D8 DP-BF
OP-BE C0 04 LDX $C004
PC-EC83 A-81 B-BF X-FFFF Y-BFB2 U-BF45 S-BF35 CC-D8 DP-BF
OP-BF B1 02 STX $B102
PC-EC86 A-81 B-BF X-FFFF Y-BFB2 U-BF45 S-BF35 CC-D8 DP-BF
OP-B6 C0 01 LDA $C001
PC-EC89 A-81 B-BF X-FFFF Y-BFB2 U-BF45 S-BF35 CC-D8 DP-BF
OP-BE C0 06 LDX $C006
PC-EC8C A-81 B-BF X-FFFF Y-BFB2 U-BF45 S-BF35 CC-D8 DP-BF
OP-BF B1 04 STX $B104
>